Reverse Camera C02 Wireless

Suitable for car,taxi or motorhome. Lorry/Truck is not supported

Specification of Reverse Camera: 

Chipset: South Korean PC1030 chip

Image Sensor: 1/3 " Color CMOS

Effective Pixels: PAL 512(H)X582(V); NTSC 512(H)X492(V)

Horizontal Resolution: 420 TVL

Minimum Illumination: 0.1Lux

Lens: 1.9mm 

Lens Angle: 170 degree

Synchronization: Internal synchronization

Signal to noise ratio: >48db

Signal System: PAL / NTSC

Electronic Shutter: Auto

Video Output: RCA interface, 1.0Vp-p, 75Ohm

White Balance: Auto

Backlight Compensation: Auto

Power: DC 12V

Current Consumption: 50-60mA, Max 130mA with IR on

Operating Temperature: -20~+60, RH95% Max

Storage Temperature: -30~ +80, RH95% Max

Video cable length: 6m

Power supply cable length: 1.5m 

Specification of ​2.4g Wireless Transmitter and Receiver:

Work Range:Up to about 80m(Hollowness)

Connects to rear-view camera and front video screen

Power: DC 12V

Transmitter/Receiver Cable Length:1.5m

Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit. 

Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end. 

The transmitter also includes a handy pass through for the power so you can connect it inline with your camera. 

Wireless transmitter with male phono plug and male 2.5mm power plug for supplying power to the camera. 

Wireless receiver with male phono plug for connection to monitor.

Packing:

1 x Rear View Camera

1 x transmitter

1 x receiver

1 x English Instruction manual